Power Management IC Development Tools TPS2458 ATCA AdvMC Cntlr w/I2C Eval Mod
The is a TPS2458 based hot swap/ORing controller evaluation module, which is a PCB platform for users to learn about the features and operation of the TPS2458 integrated circuit. The TPS2458 ATCA AdvancedMC controller IC manages a 12V and a 3.3V power rail and features inrush and fault current limiting, FET OR"ing, input UVLO protection and logic level enable inputs. Current control on the 12V rail has a high degree of programmability, including independent current limit and fast trip thresholds. Overcurrent fault timing is managed with user programmable shut down delays, and each of the two power channels has dedicated fault and power good reporting outputs. In addition, current sense and pass and block FET"s for the 3.3V channel is fully integrated into the device. Power management applications based on the TPS2458 are easily configured to meet the requirements for 12V and 3.3V control of advanced Mezzanine Card modules.
- .
- One TPS2458 ATCA advancedMC controller IC
- .
- Programming and sense resistors 12V
- .
- Low RDSON pass and block FET"s 12V
- .
- Input and output power jacks for external supply and optional load connection
- .
- Up to 880µF jumpered load capacitors for simulated payload power output bulk capacitance
- .
- 150µF jumpered load capacitor for the management power channel
- .
- Multiple, switch selectable fault timer settings, each channel
- .
- Slide switch actuation of enable inputs
- .
- Expansion port headers
It is important to operate this EVM within the input voltage range of 3V to 12V and the output voltage range of 3V to 12V. Exceeding the specified input range may cause damage to the EVM.