TEXAS INSTRUMENTS TLK110CUSEVM 评估模块, TLK110CUSEVM, TLK110, 2电源和6个状态LED灯, 电阻打包选项
The is an evaluation module provides a platform that allows the users to easily evaluate the TLK110 device. The TLK110 is a single port Ethernet PHY for 10Base-T and 100Base TX signalling. This device integrates all the physical layer functions needed to transmit and receive data on standard twisted pair cables. The TLK110 supports the standard media independent interface and reduced media independent interface for direct connection to a media access controller MAC. The TLK110 is designed for power supply flexibility, and can operate with a single 3.3V power supply or with combinations of 3.3V and 1.55V power supplies for reduced power operation. The TLK110 uses mixed signal processing to perform equalization, data recovery, and error correction to achieve robust operation over CAT 5 twisted pair wiring. This device not only meets the requirements of IEEE 802.3, but maintains high margins in terms of cross talk and alien noise.
- .
- The TLK110CUSEVM is designed to work in industrial temperatures
- .
- The TLK110CUSEVM supports 10/100 Base-T and is IEEE 802.3 standard compliant
- .
- Configurable PHY addresses 08h - 31h
- .
- Single sided component placement
- .
- CFG_ANEG_MODE
- .
- CFG_ANAEG_SPD_0,1
- .
- CFG_CROSSOVER
- .
- Configurable 8 PHY Addresses 01h default or any other address between 00h - 07h using jumpers
This EVM should be operated within the input range of 5V to 3.3V . Exceeding the specified input range may cause unexpected operation or irreversible damage to the EVM.