NXP TDA8020HL/C2,118 专用接口, I2C, 银行终端, 网络终端, 机顶盒, 2.7 V, 6.5 V, LQFP, 32 引脚
The is a one-chip dual Smart Card Interface controlled by the I²C-bus. The device guarantees conformity to ISO 7816 or EMV2000 with very few external components. It operates with a supply voltage from 2.7 to 6.5V. An integrated voltage supervisor ensures that no spike appears on cards contacts during power-on or off. The supervisor also initializes the device and forces an automatic emergency deactivation of the contacts in the event of a supply drop-out. As long as the supply voltage is below the threshold voltage Vth1, the capacitor CDEL remains uncharged. When the supply voltage reaches Vth1 and Vhys1, then CDEL is charged with a small current source of approximately 2µA. When the voltage on CDEL reaches Vth2, then the supervisor is no longer active. As long as the supervisor is active pin IRQ is LOW, bit SUPL in the status register is set. When pin IRQ goes HIGH the voltage supervisor becomes inactive.
电源电压DC 2.70V min
针脚数 32
耗散功率 500 mW
输出功率 500 mW
工作温度Max 85 ℃
工作温度Min -40 ℃
耗散功率Max 500 mW
电源电压 2.7V ~ 3.6V
电源电压Max 6.5 V
电源电压Min 2.7 V
安装方式 Surface Mount
引脚数 32
封装 LQFP-32
长度 7 mm
宽度 7 mm
高度 1.4 mm
封装 LQFP-32
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Cut Tape CT
制造应用 智能卡, Communications & Networking, 通信与网络
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/12/17
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
TDA8020HL/C2,118 NXP 恩智浦 | 当前型号 | 当前型号 |
TDA8020HL/C2,151 恩智浦 | 完全替代 | TDA8020HL/C2,118和TDA8020HL/C2,151的区别 |
TDA8020HL/C2 恩智浦 | 完全替代 | TDA8020HL/C2,118和TDA8020HL/C2的区别 |
TDA8020HL/C1,118 恩智浦 | 类似代替 | TDA8020HL/C2,118和TDA8020HL/C1,118的区别 |