TPD12S016RKTR

TEXAS INSTRUMENTS  TPD12S016RKTR  芯片, 数值线, HDMI配套芯片

The is a single-chip High Definition Multimedia Interface HDMI device with auto-direction sensing I²C voltage level shift buffers, a load switch and integrated low capacitance high-speed electrostatic discharge ESD transient voltage suppression protection diodes. A 55mA current limited 5V output 5V_OUT sources the HDMI power line. The control of 5V_OUT and the hot plug detect circuitry is independent of the LS_OE control signal and is controlled by the CT_HPD pin, which enables the detection scheme 5V_OUT and HPD to be active before enabling the HDMI link. The SDA, SCL and CEC lines pull up to VCCA on the A side. On the B side, the CEC_B pin pulls up to an internal 3.3V supply rail, SCL_B and SDA_B each pull up to the 5V rail 5V_OUT. The SCL and SDA pins meet the I²C specification and drive up to 750pF capacitive loads, exceeding the HDMI 1.4 specifications.

.

Conforms to HDMI compliance tests without any external components

.

Supports HDMI 1.4 data rate

.

Matches class D and class C pin mapping

.

On-chip load switch with 55mA current limit at the HDMI 5V_OUT pin

.

Back-drive protection on HDMI connector side ports

.

Integrated pull-up and pull-down resistors per HDMI specification

.

±8kV Contact discharge

.

Green product and no Sb/Br

Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.