高级LinCMOSâ ?? ¢轨到轨输出,宽输入电压运算放大器 Advanced LinCMOS⢠RAIL-TO-RAIL OUTPUT WIDE-INPUT-VOLTAGE OPERATIONAL AMPLIFIERS
The TLV244x and TLV244xA are low-voltage operational amplifiers from Texas Instruments. The common-mode input voltage range of these devices has been extended over typical standard CMOS amplifiers, making them suitable for a wide range of applications. In addition, these devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. Both devices offer comparable ac performance while having lower noise, input offset voltage, and power dissipation than existing CMOS operational amplifiers. The TLV244x has increased output drive over previous rail-to-rail operational amplifiers and can drive 600- loads for telecommunications applications.
The other members in the TLV244x family are the low-power, TLV243x, and micro-power, TLV2422, versions.
The TLV244x, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels and low-voltage operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single- or split-supplies makes this family a great choice when interfacing with analog-to-digital converters ADCs. For precision applications, the TLV244xA is available with a maximum input offset voltage of 950 µV.
If the design requires single operational amplifiers, see the TLV2211/21/31. This is a family of rail-to-rail output operational amplifiers in the SOT-23 package. Their small size and low power consumption make them ideal for high-density battery-powered equipment.
输出电流 ≤50 mA
供电电流 750 µA
电路数 2
通道数 2
耗散功率 725 mW
共模抑制比 70 dB
输入补偿漂移 2.00 µV/K
带宽 1.75 MHz
转换速率 1.40 V/μs
增益频宽积 1.81 MHz
输入补偿电压 300 µV
输入偏置电流 1 pA
工作温度Max 125 ℃
工作温度Min -40 ℃
增益带宽 1.81 MHz
耗散功率Max 725 mW
共模抑制比Min 70 dB
电源电压 2.7V ~ 10V
电源电压Max 10 V
电源电压Min 2.7 V
安装方式 Surface Mount
引脚数 8
封装 SOIC-8
长度 4.9 mm
宽度 3.91 mm
高度 1.58 mm
封装 SOIC-8
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
TLV2442AQDRQ1 TI 德州仪器 | 当前型号 | 当前型号 |
TLV2442AQDRG4Q1 德州仪器 | 完全替代 | TLV2442AQDRQ1和TLV2442AQDRG4Q1的区别 |
TLV2442QDR 德州仪器 | 完全替代 | TLV2442AQDRQ1和TLV2442QDR的区别 |
TLV2442AQDG4 德州仪器 | 完全替代 | TLV2442AQDRQ1和TLV2442AQDG4的区别 |