TEXAS INSTRUMENTS TLC2252AIDG4 运算放大器, 双路, 200 kHz, 2个放大器, 0.12 V/µs, ± 2.2V 至 ± 8V, SOIC, 8 引脚
description
The TLC2252 and TLC2254 are dual and quadruple operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC225x family consumes only 35 µA of supply current per channel. This micropower operation makes them good choices for battery-powered applications. The noise performance has been
dramatically improved over previous generations of CMOS amplifiers. Looking at Figure 1, the TLC225x has a noise level of 19 nV/√Hzat 1kHz; four times lower than competitive micropower solutions.
Output Swing Includes Both Supply Rails
Low Noise. . . 19 nV/√HzTyp at f = 1 kHz
Low Input Bias Current...1 pA Typ
Fully Specified for Both Single-Supply and Split-Supply Operation
Very Low Power...35 µA Per Channel Typ
Common-Mode Input Voltage Range Includes Negative Rail
Low Input Offset Voltage 850 µV Max at TA= 25°C TLC225xA
Macromodel Included
Performance Upgrades for the TS27L2/L4 and TLC27L2/L4
Available in Q–Temp Automotive
HighRel Automotive Applications
Configuration Control / Print Support
Qualification to Automotive Standards
电源电压DC 16.0 V
输出电流 ≤50 mA
供电电流 80 µA
电路数 2
通道数 2
针脚数 8
耗散功率 0.724 W
共模抑制比 70 dB
输入补偿漂移 500 nV/K
带宽 200 kHz
转换速率 120 mV/μs
增益频宽积 0.2 MHz
输入补偿电压 200 µV
输入偏置电流 1 pA
工作温度Max 125 ℃
工作温度Min -40 ℃
增益带宽 0.21 MHz
耗散功率Max 724 mW
共模抑制比Min 70 dB
电源电压Max 8 V
安装方式 Surface Mount
引脚数 8
封装 SOIC-8
封装 SOIC-8
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Each
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
TLC2252AIDG4 TI 德州仪器 | 当前型号 | 当前型号 |
TLC2252AIDR 德州仪器 | 类似代替 | TLC2252AIDG4和TLC2252AIDR的区别 |
TLC2252AID 德州仪器 | 类似代替 | TLC2252AIDG4和TLC2252AID的区别 |
TLC2252CDG4 德州仪器 | 类似代替 | TLC2252AIDG4和TLC2252CDG4的区别 |