TEXAS INSTRUMENTS TL16C550CPTG4 接口, UART, 1通道, 1 Mbps, 3 V, 3.6 V, LQFP, 48 引脚
UART IC 1, UART Channel 16 Byte 48-LQFP 7x7
得捷:
IC ASYNC COMM ELEMENT 48-LQFP
立创商城:
TL16C550CPTG4
e络盟:
接口, UART, 1通道, 1 Mbps, 3 V, 3.6 V, LQFP, 48 引脚
艾睿:
UART 1-CH 16Byte FIFO 3.3V/5V 48-Pin LQFP Tray
安富利:
The TL16C550C and the TL16C550CI are functional upgrades of the TL16C550B asynchronous communications element ACE, which in turn is a functional upgrade of the TL16C450. Functionally equivalent to the TL16C450 on power up character or TL16C450 mode, the TL16C550C and the TL16C550CI, like the TL16C550B, can be placed in an alternate FIFO mode. This relieves the CPU of excessive software overhead by buffering received and transmitted characters. The receiver and transmitter FIFOs store up to 16 bytes including three additional bits of error status per byte for the receiver FIFO. In the FIFO mode, there is a selectable autoflow control feature that can significantly reduce software overload and increase system efficiency by automatically controlling serial data flow using RTS\ output and CTS\ input signals.The TL16C550C and TL16C550CI perform serial-to-parallel conversions on data received from a peripheral device or modem and parallel-to-serial conversion on data received from its CPU. The CPU can read the ACE status at any time. The ACE includes complete modem control capability and a processor interrupt system that can be tailored to minimize software management of the communications link.Both the TL16C550C and the TL16C550CI ACE include a programmable baud rate generator capable of dividing a reference clock by divisors from 1 to 65535 and producing a 16× reference clock for the internal transmitter logic. Provisions are included to use this 16× clock for the receiver logic. The ACE accommodates a 1-Mbaud serial rate 16-MHz input clock so that a bit time is 1 µs and a typical character time is 10 µs start bit, 8 data bits, stop bit.Two of the TL16C450 terminal functions on the TL16C550C and the TL16C550CI have been changed to TXRDY\ and RXRDY\, which provide signaling to a DMA controller.
Chip1Stop:
UART 1-CH 16byte FIFO 3.3V/5V 48-Pin LQFP Tray
Verical:
UART 1-CH 16byte FIFO 3.3V/5V 48-Pin LQFP Tray
Newark:
# TEXAS INSTRUMENTS TL16C550CPTG4 UART Interface, 1, 1 Mbps, 3 V, 3.6 V, LQFP, 48
电源电压DC 3.00V min
工作电压 5.00V, 3.30V
供电电流 8 mA
通道数 1
针脚数 48
时钟频率 14.9 MHz
数据速率 1.00 Mbps
工作温度Max 70 ℃
工作温度Min 0 ℃
电源电压 3V ~ 5.25V
电源电压Max 3.6 V
电源电压Min 3 V
安装方式 Surface Mount
引脚数 48
封装 LQFP-48
封装 LQFP-48
工作温度 0℃ ~ 70℃
产品生命周期 Active
包装方式 Tray
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
TL16C550CPTG4 TI 德州仪器 | 当前型号 | 当前型号 |
TL16C550CPTR 德州仪器 | 完全替代 | TL16C550CPTG4和TL16C550CPTR的区别 |
TL16C550CPTRG4 德州仪器 | 完全替代 | TL16C550CPTG4和TL16C550CPTRG4的区别 |
TL16C550CPT 德州仪器 | 类似代替 | TL16C550CPTG4和TL16C550CPT的区别 |