TC1270ANLVRCTR

电压监控器与手动复位输入 Voltage Supervisor with Manual Reset Input

General Description

For many of today’s microcontroller applications, care must be taken to prevent low-power conditions that can

cause many different system problems. The most common causes are brown-out conditions, where the system supply drops below the operating level momentarily. The second most common cause is when a slowly decaying power supply causes the microcontroller to begin executing instructions without sufficient voltage to sustain volatile memory RAM, thus producing indeterminate results.

Features:

• Precision voltage monitor

\- 2.63V, 2.93V, 3.08V, 4.38V and 4.63V trip points Typical

• Manual Reset input

• Reset Time-out Delay:

\- Standard: 280 ms Typical

\- Optional: 2.19 ms, and 35 ms Typical

• Power Consumption ≤15 µA max

• No glitches on outputs during power-up

• Active Low Output Options:

\- Push-Pull Output and Open-Drain Output

• Active High Output Option:

\- Push-Pull Output

• Replacement for Specification compatible with:

\- TC1270, TC1271

\- TCM811, TCM812

• Fully static design

• Low voltage operation 1.0V

• ESD protection:

\- ≥4 kV Human Body Model HBM

\- ≥400V Machine Model MM

• Extended E Temperature range:

-40°C to +125°C

• Package Options:

\- 4-lead SOT-143

\- 5-lead SOT-23

\- Pb-free Device