LDO(低压降)线性稳压器,150mA,1.0V 至 1.9V,Texas Instruments### LDO(低压降)线性稳压器,Texas Instruments低压降或 LDO 为线性电压稳压器。 我们有多种系列的线性稳压器。 LDO 稳压器可在输入 - 输出差分电压较小时运行。 LDO 电压稳压器可提供快速瞬态响应、宽输入电压范围、低静态电流、低噪声、高 PSRR。
LDO(低压降)线性稳压器,150mA,1.0V 至 1.9V,Texas Instruments
得捷:
IC REG LIN 1.25V 150MA SOT23-5
立创商城:
TPS731125DBVT
德州仪器TI:
150-mA, high-accuracy, ultra-low-dropout voltage regulator with reverse current protection & enable
欧时:
### LDO(低压降)线性稳压器,150mA,1.0V 至 1.9V,Texas Instruments### LDO(低压降)线性稳压器,Texas Instruments低压降或 LDO 为线性电压稳压器。 我们有多种系列的线性稳压器。 LDO 稳压器可在输入 - 输出差分电压较小时运行。 LDO 电压稳压器可提供快速瞬态响应、宽输入电压范围、低静态电流、低噪声、高 PSRR。
贸泽:
LDO Voltage Regulators 150-mA NMOS LDO w/ Reverse Current Prot
艾睿:
Don&s;t let unpredictable voltage levels ruin your circuit! Use this LDO TPS731125DBVT linear regulator from Texas Instruments to control your voltage levels! This device has a maximum power dissipation of 560 mW. Its typical dropout voltage at current is 0.03@150mA V. It has an overall accuracy of ±0.5 %. This voltage regulation device&s;s single output can produce a current up to 0.15 A. Supply your circuit with sufficient power by implementing this, which requires a minimum input voltage of 1.7 V that does not exceed 5.5 V. With a fixed output that has a voltage of 2.5 V, this is power management at its best. A load regulation of 0.002%/mATyp and line regulation of 0.01%/VTyp is necessary for providing a constant voltage level at your output. Its maximum power dissipation is 560 mW. This component will be shipped in tape and reel packaging for effective mounting and safe delivery. Its polarity is positive. This voltage regulation device has an operating temperature range of -40 °C to 125 °C. The maximum dropout voltage is 0.1@150mA V.
安富利:
LDO Regulator Pos 2.5V 0.15A 5-Pin SOT-23 T/R
Chip1Stop:
Single Channel LDO Single Output LDO, 150mA, Fixed 1.25V, Reverse Current Protection LDO Regulator Pos 2.5V 0.15A 5-Pin SOT-23 T/R
Verical:
LDO Regulator Pos 2.5V 0.15A 5-Pin SOT-23 T/R
DeviceMart:
IC REG LDO 1.25V .15A SOT23-5
额定功率 0.58 W
输出接口数 1
输出电压 1.25 V
输出电流 150 mA
耗散功率 0.56 W
静态电流 400 µA
输出电容类型 Ceramic
跌落电压 0.03V @150mA
调节输出数 1
输入电压Max 5.5 V
输入电压Min 1.7 V
输出电流Max 150 mA
工作温度Max 125 ℃
工作温度Min -40 ℃
耗散功率Max 560 mW
精度 ±0.5 %
输入电压 1.7V ~ 5.5V
安装方式 Surface Mount
引脚数 5
封装 SOT-23-5
长度 2.9 mm
宽度 1.6 mm
高度 1.15 mm
封装 SOT-23-5
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Tape & Reel TR
RoHS标准 RoHS Compliant
含铅标准 Lead Free
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
TPS731125DBVT TI 德州仪器 | 当前型号 | 当前型号 |
TPS731125DBVR 德州仪器 | 类似代替 | TPS731125DBVT和TPS731125DBVR的区别 |
TPS731125DBVTG4 德州仪器 | 类似代替 | TPS731125DBVT和TPS731125DBVTG4的区别 |
TPS731125DBVRG4 德州仪器 | 类似代替 | TPS731125DBVT和TPS731125DBVRG4的区别 |