TLC7701IDG4

TEXAS INSTRUMENTS  TLC7701IDG4  监控器电路, 高电平有效, 低电平有效复位, 2V-6V输入, SOIC-8

The is a single-supply Voltage Supervisor with active-high and active-low push-pull output. The MicroPower supply voltage supervisor provides reset control, primarily in microcomputer and microprocessor systems. During power-on, /RESET is asserted when VDD reaches 1V. After minimum VDD >=2V is established, the circuit monitor SENSE voltage and keeps the reset outputs active as long as SENSE voltage VISENSE remains below the threshold voltage. An internal timer delays return of the output to the inactive state to ensure proper system reset. In addition to the power-on-reset and under-voltage-supervisor function, the TLC77xx adds power-down control support for static RAM. When CONTROL is tied to GND, RESET will act as active high. The voltage monitor contains additional logic intended for control of static memories with battery backup during power failure.

.

power-ON reset generator

.

Automatic reset generation after voltage drop

.

Precision voltage sensor

.

Temperature-compensated voltage reference

.

Programmable delay time by external capacitor

.

Power-down control support for static ram with battery backup

.

Power saving totem-pole outputs

.

16µA Maximum supply current