







集成了复位或PG 250 mA的LDO稳压器 250-mA LDO REGULATORS WITH INTEGRATED RESET OR PG
PMIC - 稳压器 - 线性 正 固定 1 输出 250mA 8-VSSOP
立创商城:
TPS77328DGK
德州仪器TI:
250-mA, 10-V, low-dropout voltage regulator with RESET with delay
得捷:
IC REG LINEAR 2.8V 250MA 8VSSOP
贸泽:
LDO Voltage Regulators Fast Transient Response 250-mA
艾睿:
Use the LDO TPS77328DGK linear regulator from Texas Instruments to maintain a constant output voltage. This device has a maximum power dissipation of 412 mW. Its typical dropout voltage at current is 0.27@250mA V. It has an overall accuracy of ±2 %. This voltage regulation device&s;s single output can produce a current up to 0.25 A. The best way to provide power to your application is by using this, which needs a voltage of at least 2.7 V and no higher than 10 V. With a fixed output that has a voltage of 2.8 V, this is power management at its best. At a load regulation of 1mVTyp and line regulation of 0.005%/VTyp your circuit is capable of maintaining a constant voltage level at your output. Its maximum power dissipation is 412 mW. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. Its polarity is positive. This voltage regulation device has a minimum operating temperature of -40 °C and a maximum of 125 °C. The maximum dropout voltage is 0.475@250mA V.
安富利:
LDO Regulator Pos 2.8V 0.25A 8-Pin VSSOP Tube
Chip1Stop:
LDO Regulator Pos 2.8V 0.25A 8-Pin VSSOP Tube
Verical:
LDO Regulator Pos 2.8V 0.25A 8-Pin VSSOP Tube
输出接口数 1
输入电压DC 10.0V max
输出电压 2.8 V
输出电流 250 mA
耗散功率 0.412 W
静态电流 90.0 µA
输出电容类型 Tantalum
跌落电压 0.27V @250mA
调节输出数 1
输入电压Max 10 V
输入电压Min 2.7 V
输出电流Max 0.25 A
工作温度Max 125 ℃
工作温度Min 40 ℃
耗散功率Max 412 mW
精度 2 %
输入电压 ≤10 V
安装方式 Surface Mount
引脚数 8
封装 VSSOP-8
长度 3 mm
宽度 3 mm
高度 0.97 mm
封装 VSSOP-8
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Tube
RoHS标准 RoHS Compliant
含铅标准 Lead Free
| 型号/品牌 | 代替类型 | 替代型号对比 |
|---|---|---|
TPS77328DGK TI 德州仪器 | 当前型号 | 当前型号 |