TPS75925KC

TPS75925KC图片1
TPS75925KC图片2
TPS75925KC图片3
TPS75925KC图片4
TPS75925KC图片5
TPS75925KC图片6
TPS75925KC图片7
TPS75925KC图片8
TPS75925KC概述

POWER GOOD快速瞬态响应7.5 -A低压差稳压器 POWER GOOD FAST-TRANSIENT RESPONSE 7.5-A LOW-DROPOUT VOLTAGE REGULATORS

The TPS759xx family of 7.5-A low dropout LDO regulators contains four fixed voltage option regulators with integrated power-good PG\ and an adjustable voltage option regulator. These devices are capable of supplying 7.5 A of output current with a dropout of 400 mV TPS75933. Therefore, the devices are capable of performing a 3.3-V to 2.5-V conversion. Quiescent current is 125 uA at full load and drops below 10 µA when the devices are disabled. The TPS759xx is designed to have fast transient response for large load current changes.

Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low typically 400 mV at an output current of 7.5 A for the TPS75933 and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading typically 125 µA over the full range of output current, 1 mA to 7.5 A. These two key specifications yield a significant improvement in operating life for battery-powered systems.

The device is enabled when EN\ is connected to a low-level voltage. This LDO family also features a sleep mode; applying a TTL high signal to EN\ enable shuts down the regulator, reducing the quiescent current to less than 1 µA at TJ = 25°C. The power-good terminal PG\ is an active low, open drain output, which can be used to implement a power-on reset or a low-battery indicator.

The TPS759xx is offered in 1.5-V, 1.8-V, 2.5-V, and 3.3-V fixed-voltage versions and in an adjustable version programmable over the range of 1.22 V to 5 V. Output voltage tolerance is specified as a maximum of 3% over line, load, and temperature ranges. The TPS759xx family is available in a 5-pin TO–220 KC and TO–263 KTT packages.

TPS75925KC中文资料参数规格
技术参数

输出接口数 1

输入电压DC 5.50V max

输出电压 2.5 V

输出电流 7.5 A

静态电流 0.125 mA

输出电容类型 Tantalum

跌落电压 0.4V @7.5A

调节输出数 1

输入电压Max 5.5 V

输入电压Min 2.8 V

输出电流Max 7.5 A

工作温度Max 125 ℃

工作温度Min 40 ℃

精度 ±3 %

输入电压 2.8V ~ 5.5V

封装参数

安装方式 Through Hole

引脚数 5

封装 TO-220-5

外形尺寸

长度 10.16 mm

宽度 4.58 mm

高度 8.51 mm

封装 TO-220-5

物理参数

工作温度 -40℃ ~ 125℃

其他

产品生命周期 Active

包装方式 Tube

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

数据手册

TPS75925KC引脚图与封装图
TPS75925KC引脚图
TPS75925KC封装图
TPS75925KC封装焊盘图
在线购买TPS75925KC
型号: TPS75925KC
制造商: TI 德州仪器
描述:POWER GOOD快速瞬态响应7.5 -A低压差稳压器 POWER GOOD FAST-TRANSIENT RESPONSE 7.5-A LOW-DROPOUT VOLTAGE REGULATORS
替代型号TPS75925KC
型号/品牌 代替类型 替代型号对比

TPS75925KC

TI 德州仪器

当前型号

当前型号

TPS75925KCG3

德州仪器

完全替代

TPS75925KC和TPS75925KCG3的区别

锐单商城 - 一站式电子元器件采购平台