TJA1043T,112

NXP  TJA1043T,112  总线, CAN, 收发器, CAN, 1, 1, 4.5 V, 5.5 V, SOIC

The is a high-speed CAN transceiver IC provides an interface between a controller area network CAN protocol controller and the physical two-wire CAN bus. The transceiver is designed for high-speed CAN applications in the automotive industry, providing differential transmit and receive capability to a microcontroller with a CAN protocol controller.

.

Fully ISO 11898-2:2003 and ISO 11898-5:2007 Compliant

.

Loop delay symmetry timing enables communication at data rates up to 2Mbps in the CAN FD fast phase

.

Suitable for 12 and 24V Systems

.

Low Electromagnetic Emission EME and High Electromagnetic Immunity EMI

.

VIO Input Allows for Direct Interfacing with 3 and 5V Microcontrollers

.

SPLIT Voltage Output for Stabilizing Recessive Bus Level

.

Listen-only Mode for Node Diagnosis and Failure Containment

.

AEC-Q100 Qualified

.

Very Low Current Standby and Sleep Modes, with Local and Remote Wake-up

.

Capability to Power Down Entire Node While Supporting Local, Remote and Host Wake-up

.

Wake-up Source Recognition

.

Transceiver Disengages from Bus Zero Load when VBAT Absent

.

Functional Behaviour Predictable Under All Supply Conditions

.

High ESD Handling Capability on Bus Pins

.

Bus Pins and VBAT Protected Against Transients in Automotive Environments

.

Transmit Data TXD Dominant Time-out Function with Diagnosis

.

TXD-to-RXD Short-circuit Handler with Diagnosis

.

Thermal Protection with Diagnosis

.

Under-voltage Detection and Recovery on Pins VCC, VIO and VBAT

.

Bus line Short-circuit Diagnosis