TJA1020T/N1,112

TJA1020T/N1,112图片1
TJA1020T/N1,112图片2
TJA1020T/N1,112图片3
TJA1020T/N1,112概述

LIN Transceiver with Integrated Vreg 3.3V/5V 20kBd Automotive 8Pin SO Bulk

Overview

The TJA1020 is the interface between the LIN master/slave protocol controller and the physical bus in a Local Interconnect Network LIN. It is primarily intended for in-vehicle sub-networks using baud rates from 2.4 up to 20 Kbaud.

The transmit data stream of the protocol controller at the TXD input is converted by the LIN transceiver into a bus signal with controlled slew rate and wave shaping to minimize EME. The LIN bus output pin is pulled HIGH via an internal termination resistor. For a master application an external resistor in series with a diode should be connected between pin INH or pin BAT and pin LIN. The receiver detects the data stream at the LIN bus input pin and transfers it via pin RXD to the microcontroller.

In normal transceiver operation the TJA1020 can be switched in the normal slope mode or the low slope mode. In the low slope mode the TJA1020 lengthens the rise and fall slopes of the LIN bus signal, thus further reducing the already very low emission in normal slope mode.

In sleep mode the power consumption of the TJA1020 is very low, whereas in failure modes the power consumption is reduced to a minimum.

MoreLess

## Features

**General**

* Baud rate up to 20 Kbaud

* Very low ElectroMagnetic Emission EME

* High ElectroMagnetic Immunity EMI

* Low slope mode for an even further reduction of EME

* Passive behaviour in unpowered state

* Input levels compatible with 3.3 and 5 V devices

* Integrated termination resistor for Local Interconnect Network LIN slave applications

* Wake-up source recognition local or remote

* Supports K-line like functions.

**Low power management**

* Very low current consumption in sleep mode with local and remote wake-up.

**Protections**

* Transmit data TXD dominant time-out function

* Bus terminal and battery pin protected against transients in the automotive environment ISO7637

* Bus terminal short-circuit proof to battery and ground

* Thermally protected.

## Features

TJA1020T/N1,112中文资料参数规格
技术参数

电源电压DC 12.0V max

输出电压 27.0 V

输出电流 3.50 mA

电源电压 5V ~ 27V

电源电压Max 27 V

电源电压Min 5 V

封装参数

安装方式 Surface Mount

引脚数 8

封装 SOIC-8

外形尺寸

封装 SOIC-8

其他

产品生命周期 Active

包装方式 Tube

符合标准

RoHS标准 RoHS Compliant

含铅标准 Lead Free

数据手册

在线购买TJA1020T/N1,112
型号: TJA1020T/N1,112
制造商: NXP 恩智浦
描述:LIN Transceiver with Integrated Vreg 3.3V/5V 20kBd Automotive 8Pin SO Bulk
替代型号TJA1020T/N1,112
型号/品牌 代替类型 替代型号对比

TJA1020T/N1,112

NXP 恩智浦

当前型号

当前型号

TJA1020T/N,112

恩智浦

完全替代

TJA1020T/N1,112和TJA1020T/N,112的区别

TJA1020T/N,118

恩智浦

完全替代

TJA1020T/N1,112和TJA1020T/N,118的区别

TJA1020T/N/S490,11

恩智浦

完全替代

TJA1020T/N1,112和TJA1020T/N/S490,11的区别

锐单商城 - 一站式电子元器件采购平台