20W 立体声数字放大器功率级
The /TAS5103 are integrated stereo digital amplifier power stages with an advanced protection system. The TAS5102/TAS5103 are capable of driving an 8-Ω bridge-tied load BTL at up to 20 W/15 W per channel with low integrated noise at the output, low THD+N performance, and low idle power dissipation.
A low-cost, high-fidelity audio system can be built using a chipset, comprising a modulator e.g., TAS5086 and the TAS5102/TAS5103. This system only requires a simple passive LC demodulation filter to deliver high-quality, high-efficiency audio amplification with proven EMI compliance. These devices require two power supplies, at 3.3 V for VREG, and up to 23 V for PVDD. The TAS5102/TAS5103 does not require power-up sequencing due to internal power-on reset. The efficiency of this digital amplifier is greater than 90% into 8 Ω, which enables the use of smaller power supplies and heatsinks.
The TAS5102/3 has an innovative protection system integrated on chip, safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and overtemperature protection. The TAS5102/TAS5103 has a new proprietary current-limiting circuit that reduces the possibility of device shutdown during high-level music transients.
| 型号/品牌 | 代替类型 | 替代型号对比 |
|---|---|---|
TAS5102 TI 德州仪器 | 当前型号 | 当前型号 |
TAS5103 德州仪器 | 功能相似 | TAS5102和TAS5103的区别 |
TAS3308 德州仪器 | 功能相似 | TAS5102和TAS3308的区别 |
TAS5727 德州仪器 | 功能相似 | TAS5102和TAS5727的区别 |