TPS2301

具有独立通道电路中断功能和电源良好报告功能的 3-13V 双路热插拔 IC，工作态高电平启用

The TPS2300 and are dual-channel hot-swap controllers that use external N-channel MOSFETs as high-side switches in power applications. Features of these devices, such as overcurrent protection OCP, inrush current control, output-power status reporting, and the ability to discriminate between load transients and faults, are critical requirements for hot-swap applications.

The TPS2300/01 devices incorporate undervoltage lockout UVLO and power-good PG reporting to ensure the device is off at start-up and confirm the status of the output voltage rails during operation. Each internal charge pump, capable of driving multiple MOSFETs, provides enough gate-drive voltage to fully enhance the N-channel MOSFETs. The charge pumps control both the rise times and fall times dv/dt of the MOSFETs, reducing power transients during power up/down. The circuit-breaker functionality combines the ability to sense overcurrent conditions with a timer function; this allows designs such as DSPs, that may have high peak currents during power-state transitions, to disregard transients for a programmable period.

.

Dual-Channel High-Side MOSFET Drivers

.

IN1: 3 V to 13 V; IN2: 3 V to 5.5 V

.

Output dV/dt Control Limits Inrush Current

.

Circuit-Breaker With Programmable Overcurrent

Threshold and Transient Timer

.

Power-Good Reporting With Transient Filter

.

CMOS- and TTL-Compatible Enable Input

.

Low, 5-µA Standby Supply Current  Max

.

Available in 20-Pin TSSOP Package

.

40°C to 85°C Ambient Temperature Range

.

Electrostatic Discharge Protection