TLV2432A-Q1

汽车类高级 LinCMOS 轨到轨输出、宽输入电压运算放大器

The TLV243x and TLV243xA are low-voltage operational amplifier from Texas Instruments. The common-mode input voltage range for each device is extended over the typical CMOS amplifiers making them suitable for a wide range of applications. In addition, these devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. The TLV243x only requires 100 µA typ of supply current per channel, making it ideal for battery-powered applications. The TLV243x also has increased output drive over previous rail-to-rail operational amplifiers and can drive 600-Ω loads for telecom applications.

The other members in the TLV243x family are the high-power, TLV244x, and micro-power, TLV2422, versions.

The TLV243x, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels and low-voltage operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single- or split-supplies makes this family a great choice when interfacing with analog-to-digital converters ADCs. For precision applications, the TLV243xA is available and has a maximum input offset voltage of 950 µV.

If the design requires single operational amplifiers, see the TLV2211/21/31. This is a family of rail-to-rail output operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment.

.

Qualified for Automotive Applications

.

ESD Protection Exceeds 2000 V Per MIL-STD-883, Method 3015; Exceeds 200 V

Using Machine Model C = 200 pF, R = 0

.

Output Swing Includes Both Supply Rails

.

Extended Common-Mode Input Voltage Range . . . 0 V to 4.5 V Min

with 5-V Single Supply

.

No Phase Inversion

.

Low Noise . . . 18 nV/√Hz Typ at f = 1 kHz

.

Low Input Offset Voltage

950 µV Max at TA = 25°C TLV243xA

.

Low Input Bias Current . . . 1 pA Typ

.

Very Low Supply Current . . . 125 µA Per Channel Max

.

600-Ω Output Drive

.

Macromodel Included