TLC5940

带有 EEprom 点校正与灰度 PWM 控制的 16 通道 LED 驱动器

The is a 16-channel, constant-current sink LED driver. Each channel has an individually adjustable 4096-step grayscale PWM brightness control and a 64-step, constant-current sink dot correction. The dot correction adjusts the brightness variations between LED channels and other LED drivers. The dot correction data is stored in an integrated EEPROM. Both grayscale control and dot correction are accessible through a serial interface. A single external resistor sets the maximum current value of all 16 channels.

The TLC5940 features two error information circuits. The LED open detection LOD indicates a broken or disconnected LED at an output terminal. The thermal error flag TEF indicates an overtemperature condition.

.

16 Channels

.

12 bit 4096 Steps Grayscale PWM Control

.

Dot Correction

.

6 bit 64 Steps

.

Storable in Integrated EEPROM

.

Drive Capability Constant-Current Sink

.

0 mA to 60 mA VCC < 3.6 V

.

0 mA to 120 mA VCC > 3.6 V

.

LED Power Supply Voltage up to 17 V

.

VCC = 3 V to 5.5 V

.

Serial Data Interface

.

Controlled In-Rush Current

.

30 MHz Data Transfer Rate

.

CMOS Level I/O

.

Error Information

.

LOD: LED Open Detection

.

TEF: Thermal Error Flag