TXB0101

具有自动方向感应和 +/-15kV ESD 保护的 1 位双向电压电平转换器

This 1-bit noninverting translator uses two separate configurable power-supply rails. The A port is designed to track VCCA. VCCA accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track VCCB. VCCB accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. VCCA should not exceed VCCB.

When the output-enable OE input is low, all outputs are placed in the high-impedance state.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.

NanoFree™ package technology is a major breakthrough in IC packaging concepts, using the die as the package.

.

Available in the Texas Instruments NanoFree™

Package

.

1.2 V to 3.6 V on A Port and

1.65 V to 5.5 V on B Port VCCA ≤ VCCB

.

VCC Isolation Feature – If Either VCC Input is at

GND, All Outputs are in the High-Impedance State

.

OE Input Circuit Referenced to VCCA

.

Low Power Consumption, 5 µA Maximum ICC

.

Ioff Supports Partial-Power-Down Mode Operation

.

Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

.

ESD Protection Exceeds JESD 22

.

A Port

.

2000 V Human Body Model A114-B

.

250 V Machine Model A115-A

.

1500 V Charged-Device Model C101

.

B Port

.

15 kV Human Body Model A114-B

.

250 V Machine Model A115-A

.

1500 V Charged-Device Model C101