TLC59213

具有锁存器的 8 通道源驱动器

The and TLC59213A are 8-bit source drivers with input latch with CLK input and CLR to set the output OFF. The TLC59213 and TLC59213A have large output source currents up to 500 mA with Darlington transistor and collectors tied to VCC. These feature make the device optimum level of driving the matrix of ink jet printer head, LEDs, and the scan-side of resistor’s matrix. The TLC59213 and TLC59213A differ only in the Data Hold Time Specification th.

The clamp diode is between output and ground for switching inductive load.

All inputs are TTL/CMOS, which enable to any logic-level inputs such as MCU, CPU or SN74LV594 serial to parallel and the output enable LED matrix display. It can also be used with another device sink driver such as TLC59210, TLC59211 and TLC59212.

.

Output Current on Each Channel

IOUT Max = –500 mA

.

VCEsus = 13.2 V

.

Input Compatible With TTL/5-V CMOS

.

Clear CLR and Clock CLK TTL/CMOS

Control Inputs

.

CLR Control Input to Off the Output

.

Darlington Source Driver

.

Clock Input Up to 1 MHz

.

Enhanced Hold Time th on TLC59213A

.

Temperature Range: –40°C to 85°C