














8引脚的电流模式推挽PWM具有可编程斜率补偿CONTROLLERS 8-PIN CURRENT MODE PUSH-PULL PWM CONTROLLERS WITH PROGRAMMABLE SLOPE COMPENSATION
半桥,推挽 稳压器 正 输出 升压/降压 - DC DC 切换控制器 IC 8-SOIC
得捷:
IC REG CTRLR MULT TOPOLOGY 8SOIC
立创商城:
升降压型 4.1V~15V 200kHz
德州仪器TI:
Current mode push-pull PWM with prog. slope comp, 100µs soft start, 4.3/4.1 UVLO, -40°C to 85°C
艾睿:
Never worry about a stable current not being supplied by using this UCC28086D current controller by Texas Instruments. Its 2 PWM outputs produce a current of 1000Max mA. This current mode controller supports half-bridge|push-pull topology. Its switching regulator has a frequency of 50 to 1000 kHz. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This current mode controller has a minimum operating temperature of -40 °C and a maximum of 85 °C. This current mode controller&s;s maximum duty cycle is 50 %. This device has a maximum of 15 V.
安富利:
Current Mode PWM Controller 1A 8-Pin SOIC Tube
Chip1Stop:
Current Mode PWM Controller 1A 8-Pin SOIC Tube
Verical:
Current Mode PWM Controller 1A 8-Pin SOIC Tube
频率 1 MHz
电源电压DC 0.00Vmin, 10.0Vmax
输出接口数 2
输入电压DC 15.0 V
输出电压 500 mV
输出电流 1 A
供电电流 2.5 mA
耗散功率 0.65 W
调节输出数 2
上升时间 25 ns
开关频率 200 kHz
拓扑结构 Half-Bridge, Push-Pull
占空比 50 %
最大占空比 50 %
下降时间 25 ns
工作温度Max 85 ℃
工作温度Min -40 ℃
耗散功率Max 650 mW
电源电压 4.3V ~ 15V
电源电压Max 15 V
安装方式 Through Hole
引脚数 8
封装 SOIC-8
封装 SOIC-8
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Cut Tape CT
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
ECCN代码 EAR99



| 型号/品牌 | 代替类型 | 替代型号对比 |
|---|---|---|
UCC28086D TI 德州仪器 | 当前型号 | 当前型号 |
UCC28086DG4 德州仪器 | 完全替代 | UCC28086D和UCC28086DG4的区别 |
UCC28086DR 德州仪器 | 完全替代 | UCC28086D和UCC28086DR的区别 |
UCC28086DRG4 德州仪器 | 类似代替 | UCC28086D和UCC28086DRG4的区别 |