UCC28/UCC38 系列,Texas Instruments隔离式回扫电源控制器提供恒定电压 CV 和恒定电流 CC 输出调节,用于提高对较大负载阶跃的瞬时响应。 初级侧调节 PSR 无需光耦合器。### 回扫控制器,Texas Instruments电流模式和电压模式 PWM 控制器 初级侧调节 峰值功率模式 低功率
回扫控制器,电流控制,UCC28/UCC38 系列,Texas Instruments
隔离式回扫电源控制器提供恒定电压 CV 和恒定电流 CC 输出调节,用于提高对较大负载阶跃的瞬时响应。 初级侧调节 PSR 无需光耦合器。
得捷:
IC REG CTRLR MULT TOPOLOGY 8DIP
欧时:
### 回扫控制器,电流控制,UCC28/UCC38 系列,Texas Instruments隔离式回扫电源控制器提供恒定电压 CV 和恒定电流 CC 输出调节,用于提高对较大负载阶跃的瞬时响应。 初级侧调节 PSR 无需光耦合器。### 回扫控制器,Texas Instruments电流模式和电压模式 PWM 控制器 初级侧调节 峰值功率模式 低功率
立创商城:
降压型 升降压型 升压型 4.1V~15V 200kHz
贸泽:
开关控制器 Crnt Mode Push-Pull w/Prog Slope Comp
艾睿:
This UCC38084P current controller by Texas Instruments will exceed your current supply needs. This current mode controller supports boost|buck|half-bridge|push-pull topology. Its 2 PWM outputs produce a current of 1000Max mA. This part offers a switching frequency of 50 to 1000 kHz in order to work properly. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This current mode controller&s;s maximum duty cycle is 50 %. This device has a maximum of 15 V. This current mode controller has an operating temperature range of 0 °C to 70 °C.
安富利:
Current Mode PWM Controller 1A 8-Pin PDIP Tube
Chip1Stop:
Current Mode PWM Controller 1A 8-Pin PDIP Tube
Verical:
Current Mode PWM Controller 1A 50kHz to 1000kHz 8-Pin PDIP Tube
德州仪器TI:
Current mode push-pull PWM with prog. slope comp, 3.5ms soft start, 4.3/4.1 UVLO, 0°C to 70°C
频率 1.00 MHz
输出接口数 2
输出电压 1.00 V
输出电流 1 A
供电电流 2.5 mA
耗散功率 1 W
调节输出数 2
上升时间 25 ns
开关频率 200 kHz
拓扑结构 Buck, Boost, Half-Bridge, Push-Pull
占空比 50 %
最大占空比 50 %
下降时间 25 ns
工作温度Max 70 ℃
工作温度Min 0 ℃
耗散功率Max 1000 mW
安装方式 Through Hole
引脚数 8
封装 PDIP-8
长度 9.81 mm
宽度 6.35 mm
高度 4.57 mm
封装 PDIP-8
工作温度 0℃ ~ 70℃
产品生命周期 Active
包装方式 Tube
RoHS标准 RoHS Compliant
含铅标准 Lead Free
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
UCC38084P TI 德州仪器 | 当前型号 | 当前型号 |
UCC38084PG4 德州仪器 | 功能相似 | UCC38084P和UCC38084PG4的区别 |