UCC2891D

TEXAS INSTRUMENTS  UCC2891D  控制器, PWM, 16V-8.5V电源, 250 kHz, 900mV/150mA输出, SOIC-16

回扫控制器，电流控制，UCC28/UCC38 系列，Texas Instruments

隔离式回扫电源控制器提供恒定电压 CV 和恒定电流 CC 输出调节，用于提高对较大负载阶跃的瞬时响应。 初级侧调节 PSR 无需光耦合器。

欧时:
回扫控制器，电流控制，UCC28/UCC38 系列，Texas Instruments隔离式回扫电源控制器提供恒定电压 CV 和恒定电流 CC 输出调节，用于提高对较大负载阶跃的瞬时响应。 初级侧调节 PSR 无需光耦合器。### 回扫控制器，Texas Instruments电流模式和电压模式 PWM 控制器 初级侧调节 峰值功率模式 低功率

得捷:
IC REG CTRLR MULT TOP 16SOIC

立创商城:
升降压型 8.5V~16V 250kHz

德州仪器TI:
110-V active clamp current mode PWM controller with P-channel clamp FET and 0.75V CS threshold

e络盟:
电流模式PWM控制器, 8.5V-16V电源, 250kHz, 900mV/150mA输出, SOIC-16

艾睿:
Texas Instruments&s; UCC2891D current controller can modulate different levels of voltage, depending on what your requirements are. Its typical operating supply voltage is 12 V. This current mode controller supports flyback|forward topology. Its single PWM output produces a current of 2000 mA. Its switching regulator has a frequency of 1000 kHz. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This current mode controller&s;s maximum duty cycle is 73 %. This current mode controller has an operating temperature range of -40 °C to 105 °C. This device has a typical operating supply voltage of 12 V. Its minimum operating supply voltage of 8.5 V, while its maximum is 14.5 V.

安富利:
Current Mode PWM Controller 2A 16-Pin SOIC Tube

Chip1Stop:
Current Mode PWM Controller 2A 16-Pin SOIC Tube

Verical:
Current Mode PWM Controller 2A 1000kHz 16-Pin SOIC Tube

Newark:
PWM CONTROLLER, SMD, 2891, SOIC16

DeviceMart:
IC REG CTRLR FLYBK ISO CM 16SOIC

Win Source:
IC REG CTRLR MULT TOP 16SOIC