UC2825DWG4

TEXAS INSTRUMENTS  UC2825DWG4  控制器, PWM, 30V-10V电源, 1 MHz, 5.15V/200mA输出, SOIC-16

The is a high speed Pulse Width Modulation PWM Controller optimized for high frequency switched mode power supply applications. Particular care was given to minimizing propagation delays through the comparators and logic circuitry while maximizing bandwidth and slew rate of the error amplifier. This controller is designed for use in either current-mode or voltage mode systems with the capability for input voltage feed-forward. Protection circuitry includes a current limit comparator with a 1V threshold, a TTL compatible shutdown port and a soft start pin which will double as a maximum duty cycle clamp. The logic is fully latched to provide jitter free operation and prohibit multiple pulses at an output. An under-voltage lockout section with 800mV of hysteresis assures low start up current. During under-voltage lockout, the outputs are high impedance. It features totem pole outputs designed to source and sink high peak currents from capacitive loads.

.

Compatible with voltage or current mode topologies

.

50ns Propagation delay to output

.

High current dual totem pole outputs 1.5A peak

.

Wide bandwidth error amplifier

.

Fully latched logic with double pulse suppression

.

Pulse-by-pulse current limiting

.

Under-voltage lockout with hysteresis

.

1.1mA Low start up current

.

Green product and no Sb/Br