低压差1安培线性稳压器系列 Low Dropout 1 Ampere Linear Regulator Family
PMIC - 稳压器 - 线性 正 可调式 1 输出 1A 8-SOIC
立创商城:
UCC381DP-ADJ
德州仪器TI:
1-A, low-dropout voltage regulator with reverse current protection from 0°C to 70°C
得捷:
IC REG LINEAR POS ADJ 1A 8SOIC
艾睿:
Control the voltage level of your circuit with this LDO UCC381DP-ADJ linear regulator from Texas Instruments. It has an overall accuracy of ±2.5 %. Its typical dropout voltage at current is 0.5@1A|0.1@200mA V. This voltage regulation device&s;s single output can produce a current up to 1 A. The best way to provide power to your application is by using this, which needs a voltage of at least 1.85 V and no higher than 9 V. With an adjustable output that has a voltage of 1.22 to 8.85 V, this is power management at its best. At a load regulation of 5mV and line regulation of 3mV your circuit is capable of maintaining a constant voltage level at your output. In order to ensure parts aren&s;t damaged by bulk packaging, this product comes in tube packaging to add a little more protection by storing the loose parts in an outer tube. This voltage regulation device has a minimum operating temperature of 0 °C and a maximum of 70 °C. The maximum dropout voltage is 0.6@1A|0.2@200mA V. Its polarity is positive.
安富利:
LDO Regulator Pos 1.22V to 8.85V 1A 8-Pin SOIC Tube
Chip1Stop:
LDO Regulator Pos 1.22V to 8.85V 1A 8-Pin SOIC Tube
Verical:
LDO Regulator Pos 1.22V to 8.85V 1A 8-Pin SOIC Tube
输出接口数 1
输入电压DC 9.00V max
输出电压 1.22V ~ 8.85V
输出电流 1 A
供电电流 650 µA
静态电流 400 µA
输出电容类型 Ceramic
跌落电压 0.5V @1A
调节输出数 1
输入电压Max 9 V
输入电压Min 1.85 V
输出电压Max 8.85 V
输出电压Min 1.22 V
输出电流Max 1 A
工作温度Max 70 ℃
工作温度Min 0 ℃
精度 2.5 %
输入电压 1.85V ~ 9V
安装方式 Surface Mount
引脚数 8
封装 SOIC-8
封装 SOIC-8
工作温度 0℃ ~ 70℃
产品生命周期 Active
包装方式 Tube
RoHS标准 RoHS Compliant
含铅标准 Lead Free
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
UCC381DP-ADJ TI 德州仪器 | 当前型号 | 当前型号 |
UCC381DPTR-ADJ 德州仪器 | 完全替代 | UCC381DP-ADJ和UCC381DPTR-ADJ的区别 |
UCC281DP-ADJ 德州仪器 | 完全替代 | UCC381DP-ADJ和UCC281DP-ADJ的区别 |
UCC381DPTR-ADJG4 德州仪器 | 类似代替 | UCC381DP-ADJ和UCC381DPTR-ADJG4的区别 |