UCC3588

UCC3588图片1
UCC3588概述

5 位可编程输出 BiCMOS 电源降压控制器

The synchronous step-down Buck regulator provides accurate high efficiency power conversion. Using few external components, the UCC1588 converts 5V to an adjustable output ranging from 3.5VDC to 2.1VDC in 100mV steps and 2.05VDC to 1.3VDC in 50mV steps with 1% DC system accuracy. A high level of integration and novel design allow this 16-pin controller to provide a complete control solution for today\x92s demanding microcontroller power requirements. Typical applications include on board or VRM based power conversion for Intel Pentium II microprocessors, as well as other processors from a variety of manufacturers. High efficiency is obtained through the use of synchronous rectification.

The softstart function provides a controlled ramp up of the system output voltage. Overcurrent circuitry detects a hard or soft short on the system output voltage and invokes a timed softstart/shutdown cycle to reduce the PWM controller on time to 5%.

The oscillator frequency is externally programmed with RT and operates over a range of 50kHz to 800kHz. The gate drivers are low impedance totem pole output stages capable of driving large external MOSFETs. Cross conduction is eliminated by fixed delay times between turn off and turn on of the external high side and synchronous MOSFETs. The chip includes undervoltage lockout circuitry which assures the correct logic states at the outputs during power up and power down.

This device is available in 16- pin surface mount, plastic and ceramic DIP, TSSOP packages, and 20 pin surface mount. The UCC3588 is specified for operation from 0°C to +70°C.

.
5-Bit Digital-to-Analog Converter DAC supports Intel Pentium II
.
Microprocessor VID Codes
.
Compatible with 5V or 12V Systems
.
1% Output Voltage Accuracy Guaranteed
.
Drives 2 N-Channel MOSFETs
.
Programmable Frequency to 800kHz
.
Power Good OV / UV / OVP Voltage Monitor
.
Undervoltage Lockout and Softstart Functions
.
Short Circuit Protection
.
Low Impedance MOSFET Drivers
.
Chip Disable
UCC3588中文资料参数规格
其他

产品生命周期 不推荐在新型设计中采用

数据手册

在线购买UCC3588
型号: UCC3588
制造商: TI 德州仪器
描述:5 位可编程输出 BiCMOS 电源降压控制器
替代型号UCC3588
型号/品牌 代替类型 替代型号对比

UCC3588

TI 德州仪器

当前型号

当前型号

UCC3882-1

德州仪器

功能相似

UCC3588和UCC3882-1的区别

锐单商城 - 一站式电子元器件采购平台