UPD78C10ACW

8Bit SINGLE-CHIP MICROCOMPUTER WITH A/D CONVERTER

DESCRIPTION

The µPD78C11A is a CMOS 8-bit microprocessor which can integrate 16-bit ALU, ROM, RAM, an A/D converter, a multi-function timer/event counter, and a general-purpose serial interface into a single chip, then expand the memory ROM/RAM up to 60K bytes externally. The µPD78C10A is a ROM-less product of the µPD78C11A, and can directly address the external memory up to 64k bytes. The µPD78C12A is a product which has more built-in ROM capacity than the µPD78C11A, and its memory ROM/RAM can be externally extended up to 56K bytes. The µPD78C10A, µPD78C11A, and µPD78C12A operated at low power consumption, because they have a CMOS construction. Also, they can hold data with low power consumption by using standby function.

FEATURES

• Abundant 159 types of instructions : 87AD series instruction set, multiplication/division instructions, 16-bit operation instructions

• Instruction cycle : 0.8 µs at 15 MHz operation

• On-chip ROM : 4096W × 8 µPD78C11A, 8192W × 8 µPD78C12A Non µPD78C10A

• On-chip RAM : 256W × 8

• High-precision 8-bit A/D converter : 8 analog inputs

• General-purpose serial interface : Asynchronous, synchronous, I/O interface mode

• Multi-function 16-bit timer/event counter

• Two 8-bit timers

• I/O lines : 32 µPD78C10A, 44 µPD78C11A, 78C12A

• Interrupt function external - 3, internal - 8 : Non-maskable interrupt × 1, maskable interrupt × 10

• Standby function : HALT mode, hardware/software STOP mode

• Zero-cross detection function : 2 inputs

• On-chip pull-up resistor port A, B, C: µPD78C11A, 78C12A only by mask option