FTDI VDRIVE3-LD 接口模块, USB, 1通道, 5.5V, VNC2-48L1B
The is an USB host/microcontroller application Development Module with an enclosure, offers a lid to cover the USB port to provide protection in harsh environments. The default firmware of the VDRIVE3 supports UART/SPI communications with the embedded USB host controller and USB host port. This product provides an attractive solution for quick and easy integration of applications with a USB flash disk or other USB client devices. VDRIVE3 is designed to support quick and easy integration of a UART/SPI application with a USB client device. The VDRIVE3 comes in a neat enclosure displaying a bicolour LED, making it suitable for incorporating into finished product designs. The VDRIVE3 utilises FTDI"s Vinculum-II VNC2-48L1B dual USB host controller IC.
- .
- USB A-type socket to connect to USB client devices
- .
- 2mm 0.08" pitch 8-pin header used for the UART/SPI interface
- .
- Connects directly and communicates with a FTDI TTL-232R-3V3-2mm USB-UART cable
- .
- Jumper selectable UART and SPI interfaces, both operating at 3.3V TTL/CMOS
- .
- Pre-programmed with V2DAP firmware
- .
- Vinculum-II debugger module port under neat enclosure, for changing the firmware
- .
- UART programming mode control signals PROG# and RESET# are accessible via an internal header