100MHz 3-DIMM CLOCK
GENERAL DESCRIPTION
The /-39A is a Clock Synthesizer which provides all clocks required for high-speed RISC or CISC microprocessor such as Intel Pentium II. W83194R-39 provides eight different frequency of CPU and PCI clocks and W83194R-39A provides sixteen CPU/PCI frequencies which are externally selectable with smooth transitions. W83194R-39/-39A also provides 13 SDRAM clocks controlled by the none-delay buffer_in pin.
The W83194R-39/-39A accepts a 14.318 MHz reference crystal as its input and runs on a 3.3V supply. Spread spectrum built in at ¡Ó0.5% or ¡Ó0.25% to reduce EMI. Programmable stopping individual clock outputs and frequency selection through I2C interface. The device meets the Pentium power-up stabilization, which requires CPU and PCI clocks be stable within 2 ms after power-up. It is not recommend to use the dual function pin for the slotsISA, PCI, CPU, DIMM. The add on cards may have a pull up or pull down.
PRODUCT FEATURES
· Supports PentiumÔ II CPU with I2C.
· 2 CPU clocks one free-running CPU clock
· 13 SDRAM clocks for 3 DIMs
· 6 PCI synchronous clocks
· One IOAPIC clock for multiprocessor support
· Optional single or mixed supply:
Vddq1=Vddq2 = Vddq3 = Vddq4 = VddL1 =VddL2= 3.3V or Vddq1= Vddq2 = Vddq3=Vddq4 = 3.3V, VddL1 = VdqL2 = 2.5V
· < 250ps skew among CPU and SDRAM clocks
· < 250ps skew among PCI clocks
· < 5ns propagation delay SDRAM from buffer input
· Skew from CPUearlier to PCI clock -1 to 4ns, center 2.6ns.
· Smooth frequency switch with selections from 50 MHz to 133 MHz CPU
· I2C 2-Wire serial interface and I2C read back