LT8610HMSE#PBF

LINEAR TECHNOLOGY  LT8610HMSE#PBF  直流-直流开关降压逐步递减稳压器, 可调, 3.4V-42V输入, 1V-41.16V输出, 2.5A输出, MSOP-16

The is a compact high-efficiency high-speed synchronous monolithic step-down Switching Regulator consumes only 2.5µA of quiescent current. Top and bottom power switches are included with all necessary circuitry to minimize the need for external components. Low ripple Burst Mode® operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program VIN undervoltage lockout or to shut down the LT8610 reducing the input supply current to 1µA. A capacitor on the TR/SS pin programs the output voltage ramp rate during start-up. The PG flag signals when VOUT is within ±9% of the programmed output voltage as well as fault conditions.

.

Allows use of small inductors

.

Low EMI

.

Current-mode operation

.

Internal compensation

.

Output soft-start and tracking

.

Accurate 1V enable pin threshold

.

50ns Fast minimum switch-ON time

.

200mV at 1A Low dropout under all conditions