Door Actuator Driver 64Pin TQFP Tray
The is a microcontroller driven multifunctional door actuator driver for automotive applications. Up to five DC motors and five grounded resistive loads can be driven with six half bridges and five high-side drivers. Four external MOS transistors in bridge configuration can be driven. An electrochromic mirror glass can be controlled using the integrated SPI-driven module in conjunction with an external MOS transistor. The mirror glass can also be discharged through a negative supply. The integrated SPI controls all operating modes forward, reverse, brake and high impedance. All diagnostic information is available via SPI read.
**Key Features**
-
.
-
AEC-Q100 qualified
-
.
-
One full bridge for 6 A load RON = 150 mΩ
-
.
-
Two half bridges for 3 A load RON = 300 mΩ
-
.
-
Two half bridges for 0.5 A load RON = 1600 mΩ
-
.
-
One high-side driver for 5 A load RON = 100 mΩ
-
.
-
One configurable high-side driver for up to 1.5 A RON = 500 mΩ or 0.35 A RON = 1600 mΩ load
-
.
-
One configurable high-side driver for 0.7 A RON = 800 mΩ or 0.35 A RON = 1600 mΩ load
-
.
-
Two high-side drivers for 0.5 A load RON = 1600 mΩ
-
.
-
Programmable softstart function to drive loads with higher inrush currents as current limitation value
-
.
-
Very low VS current consumption in standby mode IS < 6 μA typ; Tj ≤ 85 °C
-
.
-
Current monitor output for all high-side drivers
-
.
-
Central two-stage charge pump
-
.
-
Motor bridge driver with full Rdson down to 6 V
-
.
-
Device contains temperature warning and protection
-
.
-
Open-load detection for all outputs
-
.
-
Overcurrent protection for all outputs
-
.
-
Separated half bridges for door lock motor
-
.
-
Programmable PWM control of all outputs
-
.
-
STM standard serial peripheral interface ST-SPI 3.1
-
.
-
Control block for electrochromic element
-
.
-
Electrochromic element can be negatively discharged
-
.
-
Prepared for additional fail-safe path for H-bridge