TEXAS INSTRUMENTS MAX3221IDB. 线路接收器, RS232, 3V-5.5电源, SSOP-16
The is a RS-232 Line Driver and Receiver with dedicated enable pin and a dual charge-pump circuit and ±15kV ESD protection pin to pin serial-port connection pins, including GND. The device meets the requirements of A/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3 to 5.5V supply. This device operates at data signalling rate up to 250kbps and a maximum of 30V/µs driver output slew rate. Flexible control options for power management are available when the serial port is inactive. The automatic power-down feature functions when FORCEON is low and FORCEOFF is high. During this mode of operation, if the device does not sense a valid RS-232 signal on the receiver input, the driver output is disabled and the supply current is reduced to 1µA.
电源电压DC 3.30 V, 5.00 V
供电电流 1 mA
针脚数 16
数据速率 250 kbps
驱动器/包 1
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 3V ~ 5.5V
电源电压Max 5.5 V
电源电压Min 3 V
安装方式 Surface Mount
引脚数 16
封装 SSOP-16
长度 6.2 mm
宽度 5.3 mm
高度 1.95 mm
封装 SSOP-16
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Each
制造应用 消费电子产品, 便携式器材, 无线, 计算机和计算机周边
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2014/12/17
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
MAX3221IDB TI 德州仪器 | 当前型号 | 当前型号 |
MAX3221IDBR 德州仪器 | 完全替代 | MAX3221IDB和MAX3221IDBR的区别 |
MAX3221EIDB 德州仪器 | 完全替代 | MAX3221IDB和MAX3221EIDB的区别 |
MAX3221IDBRE4 德州仪器 | 完全替代 | MAX3221IDB和MAX3221IDBRE4的区别 |