








Murata 1W DIP Dual Output Unregulated Isolated DC-DC Converter - MEA1 Series1W dual output unregulated DC/DC converters with galvanic isolation to reduce switching noise. These 1W dual output 1 kVDC isolated unregulated DC/DC converters have a wide temperature performance at full load, do not require a heatsink or any external components, have an industry standard pin-out and power sharing on output. All of the rated power may be drawn from a single output providing the total load doesn"t exceed 1W. An ideal application for these 1W dual output 1 kVDC isolated unregulated DC/DC converters is the provision of dual rail supplies.Industry standard pin-out Heatsink not required Power sharing on output Efficiency of up to 89.5 % Power density to 85W/cm3 Wide temperature performance at full 1W load; -40° to 85°C Fully encapsulated with toroidal magnetics No external components required No electrolytic or tantalum capacitors UL 94V-0 package material ### 注Power derates above 85°C### 认可cULus### 标准UL 60950### Murata 电源解决方案 - DIP
Murata 1W DIP Dual Output Unregulated Isolated DC-DC Converter - MEA1 Series
1W 双输出无稳压直流/直流转换器,具有电化隔离,可减少切换噪音。这些 1W 双输出 1kV 直流无稳压直流/直流转换器具有很宽的满负载时温度性能,无需散热器或任何外部组件,具有工业标准引脚和输出功率分配。只要总负载不超过 1W,所有额定功率均可从单个输出获得。这些 1W 双输出 1kV 直流隔离无稳压直流/直流转换器的理想应用是供应双导轨电源。
工业标准引脚
不需要散热器
输出上共享功率
效率高达 89.5%
功率密度达到 85W/cm3
1W 满负载时温度性能较宽,-40°C 至 85°C
完全封装,带环形磁铁
无需外部组件
无电解或钽电容器
包装采用 UL 94V-0 材料
### 注
Power derates above 85°C
### 标准
UL 60950
### 认可
cULus
电源电压DC 15.0 V
额定功率 1 W
输出接口数 2
输入电压DC 13.5V ~ 16.5V
输出电压 ±12 VDC
输出电流 42.0 mA
输出功率 1 W
隔离电压 1 kV
输入电压Max 16.5 V
输入电压Min 13.5 V
输入电压DC Max 16.5 V
输入电压DC Min 13.5 v
输出电流Max 42mA, 42mA
输出功率Max 1 W
额定功率Max 1 W
输入电压 13.5VDC ~ 16.5VDC
安装方式 Through Hole
封装 DIP-14
长度 19.7 mm
宽度 10 mm
高度 7 mm
封装 DIP-14
重量 2.8 g
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Tube
制造应用 ITE(商业)
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC版本 2015/12/17