RE46C141S16TF

Sensor and Detector Interface 12V 16Pin SOIC Tape and Reel

General Description

The RE46C141 is low power CMOS photoelectric type smoke detector IC. With minimal external components this circuit will provide all the required features for a photoelectric type smoke detector.

The design incorporates a gain selectable photo amplifier for use with an infrared emitter/detector pair. An internal oscillator strobes power to the smoke detection circuitry for 100us every 8.1 seconds to keep standby current to a minimum. If smoke is sensed the detection rate is increased to verify an alarm condition. A high gain mode is available for push button chamber testing.

A check for a low battery condition and chamber integrity is performed every 32 seconds when in standby. The temporal horn pattern supports the NFPA 72 emergency evacuation signal.

Features

• Internal Power On Reset

• Low Quiescent Current Consumption

• Available in 16L PDIP or 16L N SOIC

• ESD Protection on all Pins

• Interconnect up to 40 Detectors

• Temporal Horn Pattern

• Low Battery and Chamber Test

• Compatible with Motorola MC145012

• Available in Standard Packaging or RoHS Compliant Pb Free Packaging.