STA309A

与DDX多声道数字音频处理器 Multi-channel digital audio processor with DDX

Description

The is a single chip solution for digital audio processing and control in multi-channel applications. It provides output capabilities for DDX® direct digital amplification. In conjunction with a DDX® power device, it provides high quality, high-efficiency, all digital amplification. The device is extremely versatile, allowing for input of most digital formats including 6.1/7.1-channel and 192 kHz, 24-bit DVD-audio, DSD/SACD. In 5.1 application the additional 2 channels can be used for audio line-out or headphone drive. In speaker mode, with 8 channel outputs in parallel, the STA309A can deliver more than 1 W.

Features

■ 8 channels of 24-bit DDX®

■ >100 dB SNR and dynamic range

■ Selectable 32 kHz - 192 kHz input sample rates

■ 6 channels of DSD/SACD input

■ Digital gain/attenuation +58 dB to -100 dB in 0.5 dB steps

■ Soft volume update

■ Individual channel and master gain/attenuation plus channel trim -10 dB to +10 dB

■ Up to 10 independent 32-bit user programmable biquads EQ per channel

■ Bass/treble tone control

■ Pre and post EQ full 8-channel input mix on all 8 channels

■ Dual independent limiters/compressors

■ Dynamic range compression or anti-clipping modes

■ AutoModes:

   – 5-band graphic EQ

   – 32 preset EQ curves rock, jazz, pop, etc.

   – Automatic volume controlled loudness

   – 5.1 to 2-channel downmix

   – Simultaneous 5.1- and 2-channel downmix outputs

   – 3 preset volume curves

   – 2 preset anti-clipping modes

   – Preset movie nighttime listening mode

   – Preset TV channel/commercial AGC mode

   – 5.1, 2.1 bass management configurations

   – AM frequency automatic output PWM frequency shifting

   – 8 preset crossover filters

■ Individual channel and master soft/hard mute

■ Automatic zero-detect and invalid input mute

■ Automatic invalid input detect mute

■ Advanced PopFree operation

■ Advanced AM interference frequency switching and noise suppression modes

■ I2S output channel mapping function

■ Independent channel volume and DSP bypass

■ Channel mapping of any input to any processing/DDX® channel

■ DC blocking selectable high-pass filter

■ Selectable per-channel DDX® damped ternary or binary PWM output

■ Max power correction for lower full-power THD

■ Variable per channel DDX® output delay control

■ 192 kHz internal processing sample rate, 24-bit to 36-bit precision