ARM微控制器 - MCU 16/32-BITS MICROS
The ultra-low-power STM32L151xD and STM32L152xD devices incorporate the connectivity power of the universal serial bus USB with the high-performance Arm® Cortex®-M3 32-bit RISC core operating at a frequency of 32 MHz 33.3 DMIPS, a memory protection unit MPU, high-speed embedded memories Flash memory up to 384 Kbytes and RAM up to 48 Kbytes, a flexible static memory controller FSMC interface for devices with packages of 100 pins and more and an extensive range of enhanced I/Os and peripherals connected to two APB buses.
The STM32L151xD and STM32L152xD devices offer three operational amplifiers, one 12-bit ADC, two DACs, two ultra-low-power comparators, one general-purpose 32-bit timer, six general-purpose 16-bit timers and two basic timers, which can be used as time bases.
Moreover, the STM32L151xD and STM32L152xD devices contain standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2S, one SDIO, three USARTs, two UARTs, and an USB. The STM32L151xD and STM32L152xD devices offer up to 34 capacitive sensing channels to simply add a touch sensing functionality to any application.
They also include a real-time clock and a set of backup registers that remain powered in Standby mode.
Finally, the integrated LCD controller except STM32L151xD devices has a built-in LCD voltage generator that allows to drive up to 8 multiplexed LCDs with the contrast independent of the supply voltage.
The ultra-low-power STM32L151xD and STM32L152xD devices operate from a 1.8 to 3.6 V power supply down to 1.65 V at power down with BOR and from a 1.65 to 3.6 V power supply without BOR option. They are available in the -40 to +85 °C and -40 to +105 °C temperature ranges. A comprehensive set of power-saving modes allows the design of low-power applications.
**Key Features**
-
.
-
Ultra-low-power platform
-
.
-
1.65 V to 3.6 V power supply
-
.
-
-40°C to 105°C temperature range
-
.
-
305 nA Standby mode 3 wakeup pins
-
.
-
1.15 μA Standby mode + RTC
-
.
-
0.475 μA Stop mode 16 wakeup lines
-
.
-
1.35 μA Stop mode + RTC
-
.
-
11 μA Low-power run mode
-
.
-
230 μA/MHz Run mode
-
.
-
10 nA ultra-low I/O leakage
-
.
-
8 μs wakeup time
-
.
-
Core: Arm® Cortex® -M3 32-bit CPU
-
.
-
From 32 kHz up to 32 MHz max
-
.
-
33.3 DMIPS peak Dhrystone 2.1
-
.
-
Memory protection unit
-
.
-
Up to 34 capacitive sensing channels
-
.
-
CRC calculation unit, 96-bit unique ID
-
.
-
Reset and supply management
-
.
-
Low-power, ultrasafe BOR brownout reset with 5 selectable thresholds
-
.
-
Ultra-low-power POR/PDR
-
.
-
Programmable voltage detector PVD
-
.
-
Clock sources
-
.
-
1 to 24 MHz crystal oscillator
-
.
-
32 kHz oscillator for RTC with calibration
-
.
-
High Speed Internal 16 MHz factory-trimmed RC +/- 1%
-
.
-
Internal low-power 37 kHz RC
-
.
-
Internal multispeed low-power 65 kHz to 4.2 MHz
-
.
-
PLL for CPU clock and USB 48 MHz
-
.
-
Pre-programmed bootloader
-
.
-
USB and USART supported
-
.
-
Serial wire debug, JTAG and trace
-
.
-
Up to 116 fast I/Os 102 I/Os 5V tolerant, all mappable on 16 external interrupt vectors
-
.
-
Memories
-
.
-
384 Kbytes of Flash memory with ECC with 2 banks of 192 Kbytes enabling Rww capability
-
.
-
48 Kbytes of RAM
-
.
-
12 Kbytes of true EEPROM with ECC
-
.
-
128-byte backup register
-
.
-
Memory interface controller supporting SRAM, PSRAM and NOR Flash
-
.
-
LCD driver except STM32L151xD devices up to 8x40 segments, contrast adjustment, blinking mode, step-up converter
-
.
-
Rich analog peripherals down to 1.8V
-
.
-
3x operational amplifiers
-
.
-
12-bit ADC 1 Msps up to 40 channels
-
.
-
12-bit DAC 2 ch with output buffers
-
.
-
2x ultra-low-power-comparatorswindow mode and wakeup capability
-
.
-
DMA controller 12x channels
-
.
-
12x peripheral communication interfaces
-
.
-
1x USB 2.0 internal 48 MHz PLL
-
.
-
5x USARTs
-
.
-
Up to 8x SPIs 2x I2S, 3x 16 Mbit/s
-
.
-
2x I2Cs SMBus/PMBus
-
.
-
1x SDIO interface
-
.
-
11x timers: 1x 32-bit, 6x 16-bit with up to 4 IC/OC/PWM channels, 2x 16-bit basic timers, 2x watchdog timers independent and window