2967086

PLC-RSC 系列PLC 接口单极和双极继电器和光耦合器外形相同。 这使模块可在具有通用桥接系统并采用相同附件的任何配置中安装。 V8 适配器可将 8 个继电器或光藕合器连接到 15 路 D-SUB 电缆。继电器和光耦合器，用于使用“可插入”切换设备进行输入和输出 四个桥接槽，可减少配线；可桥接多达 80 个模块 螺钉接线端子连接 LED 指示器和线圈抑制二极管 250V 版本具有 1500VA 的额定切换功率 尺寸（宽x厚x高）6.2 x 80 x 94 mm（单极、双极 14mm 宽） 工作温度范围 -40 至 +55°C 机械寿命（继电器）1 x 107 次操作 还提供广泛的附件 ### 接口继电器

PLC-RELAY Series: Terminal Block with Plug-in Relay or SSR

The PLC-RELAY is the only pluggable quarter inch terminal block, which accepts either a solid-state relay or an electro-mechanical relay. Using only one part number, you are able to order both the base terminal block and the pluggable relay as a single unit. The PLC-RELAY is also available with switching capacities up to 10 A at 250 VAC.

The PLC-RELAY now also available in both sensor and actuator versions. In these versions you can connect sensors and actuators to the base terminal blocks to eliminate costly wiring and additional output terminal blocks. The preceding variations are only a few of the possibilities that are available. There are now over 100 variations available in different configurations and ratings.

Electromechanical & Solid-State Relay

* Universal — Input or Output Application

* Input Specialist — Designed Specifically for 3 Wire Input Applications

* Output Specialist — Designed Specifically for 2 Wire Output Applications

* High Current / Inrush

Electromechanical Only

* 125 VDC Electro-Mechanical PLC Relays 3

* 5 VDC PLC Relay Base Terminal Block and Plug in Relays