MAX3232IPWE4

3V至5.5V多通道RS - 232线路驱动器/接收器-15 - kV ESD保护 3-V TO 5.5-V MULTICHANNEL RS-232 LINE DRIVER/ RECEIVER WITH -15-kV ESD PROTECTION

description

The MAX3232 device consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin serial-port connection pins, including GND. The device meets the requirements of A/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.

RS-232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model HBM

Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards

Operates With 3V to 5.5V VCC Supply

Operates Up To 250kbit/s

Two Drivers and Two Receivers

Low Supply Current. . . 300µA Typical

External Capacitors...4 × 0.1µF

Accepts 5-V Logic Input With 3.3V Supply

Alternative High-Speed Pin-Compatible Device 1 Mbit/s

   − SNx5C3232

Applications

− Battery-Powered Systems, PDAs,Notebooks, Laptops, Palmtop PCs, and Hand-Held Equipment