SN74AHC 系列,Texas Instruments过程:CMOS 电源电压:2 至 5.5 V ### 74AHC 系列
SN74AHC 系列,Texas Instruments
过程:CMOS
电源电压:2 至 5.5 V
### 74AHC 系列
立创商城:
SN74AHC126D
德州仪器TI:
4-ch, 2-V to 5.5-V buffers with 3-state outputs
得捷:
IC BUF NON-INVERT 5.5V 14SOIC
欧时:
### SN74AHC 系列,Texas Instruments过程:CMOS 电源电压:2 至 5.5 V ### 74AHC 系列
艾睿:
This SN74AHC126D buffer and line driver from Texas Instruments is used to amplify an analog or digital signal by driving the input to the transmission line. With a 3-state output, this is power management at its best. This line driver has an operating temperature range of -40 °C to 85 °C. This device comes in tube packaging. It has 4 channels per chip. This non-inverting device has a typical operating supply voltage of 2.5|3.3|5 V. Its minimum operating supply voltage of 2 V, while its maximum is 5.5 V.
安富利:
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SOIC Tube
Chip1Stop:
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SOIC Tube
Verical:
Buffer/Line Driver 4-CH Non-Inverting 3-ST CMOS 14-Pin SOIC Tube
Newark:
# TEXAS INSTRUMENTS SN74AHC126D LOGIC, BUS BUFFER TRI-ST QD, 14SOICN
力源芯城:
四总线缓冲器三态输出
Win Source:
IC BUF NON-INVERT 5.5V 14SOIC / Buffer, Non-Inverting 4 Element 1 Bit per Element 3-State Output 14-SOIC
电源电压DC 2.00V ~ 5.50V
输出接口数 4
通道数 4
针脚数 14
位数 4
传送延迟时间 8.50 ns
电压波节 5.00 V, 3.30 V
输出电流驱动 -1.00 mA
输入数 4
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 2V ~ 5.5V
电源电压Max 5.5 V
电源电压Min 2 V
安装方式 Surface Mount
引脚数 14
封装 SOIC-14
长度 8.65 mm
宽度 3.91 mm
高度 1.58 mm
封装 SOIC-14
工作温度 -40℃ ~ 85℃ TA
产品生命周期 Active
包装方式 Each
制造应用 信号处理, 工业, 自动化与过程控制
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/06/15
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
SN74AHC126D TI 德州仪器 | 当前型号 | 当前型号 |
SN74AHC126DRE4 德州仪器 | 完全替代 | SN74AHC126D和SN74AHC126DRE4的区别 |
SN74AHC126DE4 德州仪器 | 完全替代 | SN74AHC126D和SN74AHC126DE4的区别 |
SN74AHC126DRG4 德州仪器 | 完全替代 | SN74AHC126D和SN74AHC126DRG4的区别 |