74AVC4T245PW

NXP  74AVC4T245PW  收发器, 转换, 800mV至3.6V, TSSOP-16

The is a 4-bit dual supply Translating Transceiver that enables bidirectional level translation. It features four 2-bit input-output ports, a direction control input, an output enable input and dual supply pins. Both VCCA and VCCB can be supplied at any voltage between 0.8 and 3.6V making the device suitable for translating between any of the low voltage nodes. Pins nAn, nOE and nDIR are referenced to VCCA and pins nBn are referenced to VCCB. A HIGH on nDIR allows transmission from nAn to nBn and a LOW on nDIR allows transmission from nBn to nAn. The output enable input nOE can be used to disable the outputs so the buses are effectively isolated. The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCCA or VCCB are at GND level, both nAn and nBn are in the high-impedance OFF-state.

.

Suspend mode

.

IOFF circuitry provides partial power-down mode operation

.

Complies with JEDEC standards

.

Latch-up performance exceeds 100mA per JESD 78 class II

.

Inputs accept voltages up to 3.6V