NXP 74LVC1T45GW,125 收发器, 3态, 转换, 1.2 V至5.5 V, SOT-363-6
The is a dual supply Translating Transceiver with 3-state outputs that enable bidirectional level translation. It features two 1-bit input-output ports, a direction control input DIR and dual supply pins. Both VCCA and VCCB can be supplied at any voltage between 1.2 and 5.5V making the device suitable for translating between any of the low voltage nodes. Pins A and DIR are referenced to VCCA and pin B is referenced to VCCB. A HIGH on DIR allows transmission from A to B and a LOW on DIR allows transmission from B to A. The device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either VCCA or VCCB are at GND level, both A port and B port are in the high-impedance OFF-state. Active bus hold circuitry in the 74LVCH1T45 holds unused or floating data inputs at a valid logic level.
电源电压DC 1.20V min
电路数 1
通道数 1
针脚数 6
位数 1
工作温度Max 125 ℃
工作温度Min -40 ℃
输出通道数 1
电源电压 1.2V ~ 5.5V
电源电压Max 5.5 V
电源电压Min 1.2 V
安装方式 Surface Mount
引脚数 6
封装 SC-70-6
高度 1 mm
封装 SC-70-6
工作温度 -40℃ ~ 125℃ TA
产品生命周期 Active
包装方式 Tape & Reel TR
制造应用 Automotive, Automation & Process Control, Signal Processing, Industrial
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/12/17