Curable Adhesives Dark Grey 2e13Ohm.cm 1653PSI 7%
thermal adhesive is used for thermal management situations requiring superior bonding strengths, good thermal transfers, and non electrically conductive. It is great for heat sink bonding. It is also used as a high-powered LED adhesive that maximizes the lifetime of LEDs by dissipating their heat.
得捷:
ADHESIVE - THERMAL CONDUCTIVE EP
欧时:
### MG Chemicals 8329 缓慢固化导电粘合剂MG Chemicals 8329TCS 是缓慢固化热导电环氧粘结剂,具有极佳的粘结强度和良好的热传递性,用于对高功率电子产品和 LED 进行热管理。 固化后,环氧粘结剂在正常条件下具有惰性,因此耐水且耐盐暴露。 ### 特点和优势易于混合,1:1 混合比率 存储寿命长 可粘贴到大多数电子基片 其作用与 1 件式粘结剂类似,用于工作班次时长 固化后,在电子组件中防热且耐机械冲击 ### 典型应用作为模具连接,用于电气和电子产品 散热片粘结 用作高功率 LED 粘结剂,可通过消除其散热最大限度延长 LED 的使用寿命 ### 注对于粘性强度较弱的基片物质,表面处理(如砂磨或使用适当的底漆进行预涂层)有时会提高粘性。### 导电粘合剂 - 印刷电路板组件和粘合剂
贸泽:
Thermal Interface Products THERM CONDV EPOXY SC 6ml.20oz SYRINGES
艾睿:
Epoxy Adhesives Two Compound 1:1 Dark Grey 970000cpsPart A/2000000cpsPart B 2e13Ohm.cm 11N/mm²
Allied Electronics:
ADHESIVE - THERMALLY CONDUCTIVE EPOXY, SLOW CURE
Newark:
# MG CHEMICALS 8329TCS-6ML THERMALLY CONDUCTIVE ADHESIVE SYRINGES 0.2 OZ