LM9076

具有延迟复位输出的 150mA 超低静态电流 LDO 稳压器

The is a ±3%, 150 mA logic controlled voltage regulator. The regulator features an active low delayed reset output flag which can be used to reset a microprocessor system at turn-ON and in the event that the regulator output voltage falls below a minimum value. An external capacitor programs a delay time interval before the reset output pin can return high.

Designed for automotive and industrial applications, the LM9076 contains a variety of protection features such as thermal shutdown, input transient protection and a wide operating temperature range. The LM9076 uses an PNP pass transistor which allows low drop-out voltage operation.

.

Available with 5.0V or 3.3V Output Voltage

.

Ultra Low Ground Pin Current, 25 μA Typical for 100 μA Load

.

VOUT Initial Accuracy of ±1.5%

.

VOUT Accurate to ±3% Over Load and Temperature Conditions

.

Low Dropout Voltage, 200 mV Typical with 150 mA Load

.

Low Off State Ground Pin current for LM9076BMA

.

Delayed RESET Output Pin for Low VOUT Detection

.

+70V/-50V Voltage Transients

.

Operational VIN up to +40V

All trademarks are the property of their respective owners.