Continuity Tester Pro
* Local continuity checking is accomplished by a bright flashing LED and loud pulsating beeper
* Remote continuity with the use of the remote probe, it does not tie-up two people when identifying and labeling long distance wire/cable runs
* Flashing remote probe — Two lead, bi-color red/green LED probe allows a single user to identify up to three wires or cables at a time for correct labeling with only one trip to the other end location, cuts down on multiple trips back and forth
* Polarity verification — Drives a 20 mA DC current pulse through the wires or cables under test to the bi-color remote probe; This enables the technician to identify each of the wires under test at the other end of the cable run and eliminates the possibility of false high impedance readings
* Lightweight/Pocketsize — clips on and hangs from the cables under test without falling off
* Dims: 3.6 × 2.2 × 1.14" 90 × 57 × 29 mm; Wt: 9.2 oz 260 g
* Complete with remote probe, test leads with alligator clips, 9V battery and pouch