6N139

Logic IC Output Optocoupler, 1Element, 3750V Isolation, 0.1Mbps, 0.3INCH, DIP-8

This high gain optocoupler series  uses a Light Emitting Diode and an integrated high gain photodetector to provide extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high speed operation. Where desired VCC and VO terminals may be tied together to achieve convention photodarlington operation.A base access terminal allows a gain bandwidth adjustment to be made.

The is for use in CMOS, LSTTL, or other low power application. A 400% minimum current transfer ratio is guaranteed over 0oC to 70oC operating range for only 0.5 mA of LED current.

Selection for lower input current down to 250 mA is available upon request.

### Features

.

High Current Transfer Ratio - 2000% Typical

.

Low Input Current Requirements - 0.5 mA

.

TTL Compatible Output - 0.1 V VOL Typical

.

Performance Guaranteed over Temperature 0 degrees C to 70 degrees C

.

Base Access Allows Gain Bandwidth Adjustment

.

High Output Current - 60 mA

.

Safety Approval

UL Recognized - 2500 V rms for 1 Minute and 5000 V rms for 1 Minute for option 020 per UL 1577

CSA Approved

.

Available in 8-Pin DIP or SOIC-8 Footprint or Widebody Package

.

Options available are:

020 = 5000 Vrms/1 Minute UL Rating Option

300 = Gull Wing Surface Mount Option

500 = Tape and Reel Packaging Option

XXXE = Lead Free Option