ANALOG DEVICES ADM483EARZ-REEL 收发器, RS485 驱动器, 4.5V-5.5电源, NSOIC-8
The is a Low Power RS-485 Data Transceiver with ±15kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. The ADM483E is designed for balanced data transmission and complies with TIA/EIA Standards RS-485 and RS-422, which allow up to 32 transceivers on a bus. It has a low current shutdown mode in which it consumes only 0.1µA. Because only one driver is enabled at any time, the output of a disabled or power-down driver is three-stated to avoid overloading the bus. Drivers are short-circuit current-limited and are protected against excessive power dissipation by thermal shutdown circuitry that places their outputs into a high impedance state. The receiver input has a fail-safe feature that guarantees a logic high output if the input is open circuit.
ESD sensitive device, take proper precaution while handling the device.
电源电压DC 5.00V max
供电电流 0.36 mA
针脚数 8
数据速率 250 kbps
工作温度Max 85 ℃
工作温度Min -40 ℃
电源电压 4.5V ~ 5.5V
电源电压Max 5.5 V
电源电压Min 4.5 V
安装方式 Surface Mount
引脚数 8
封装 SOIC-8
高度 1.5 mm
封装 SOIC-8
工作温度 -40℃ ~ 85℃
产品生命周期 Active
包装方式 Tape & Reel TR
制造应用 Communications & Networking, 通信与网络
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
REACH SVHC版本 2015/12/17
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
ADM483EARZ-REEL ADI 亚德诺 | 当前型号 | 当前型号 |
ADM483EAR 亚德诺 | 完全替代 | ADM483EARZ-REEL和ADM483EAR的区别 |
ADM483EARZ 亚德诺 | 类似代替 | ADM483EARZ-REEL和ADM483EARZ的区别 |
ADM483JR-REEL7 亚德诺 | 类似代替 | ADM483EARZ-REEL和ADM483JR-REEL7的区别 |