ANALOG DEVICES AD7992BRMZ-0 模数转换器, 双路, 12 bit, 188 kSPS, 单, 2.7 V, 5.5 V, MSOP
模拟到数字转换器 12 位,2 通道,Analog Devices
### 模拟至数字转换器 - Analog Devices
模拟至数字转换器转换模拟电气信号,用于数据处理用途。 Analog Devices 提供行业最大系列 A/D 转换器产品,设计工程师依赖这些产品在接地和空间恶劣环境中提供可靠性能。
得捷:
IC ADC 12BIT SAR 10MSOP
立创商城:
AD7992BRMZ-0
欧时:
Analog Devices AD7992BRMZ-0 12 位 ADC, I2C接口, 10引脚 MSOP封装
贸泽:
模数转换器 - ADC 2CH 12-Bit w/ I2C Compatible IF
e络盟:
模数转换器, 双路, 12 bit, 188 kSPS, 单端, I2C, 串行, 单, 2.7 V
艾睿:
Dual Channel Single ADC SAR 188ksps 12-bit Serial 10-Pin MSOP Tube
安富利:
The AD7992 is a 12-bit, low power, successive approximation ADC with an I2C-compatible interface. The part operates from a single 2.7 V to 5.5 V power supply and features a 2 µs conversion time. The part contains a 2-channel multiplexer and trackand-hold amplifier that can handle input frequencies up to 11 MHz.The AD7992 provides a 2-wire serial interface compatible with I2C interfaces. The part comes in two versions, the AD7992-0 and the AD7992-1, and each version allows for at least two different I2C addresses. The AD7992-0 supports standard and fast I2C interface modes, and the AD7992-1 supports standard, fast, and high speed I2C interface modes.The AD7992 normally remains in a shutdown state while not converting, and powers up only for conversions. The conversion process can be controlled using the CONVST pin, by a command mode where conversions occur across I2C write operations, or an automatic conversion interval mode selected through software control.The AD7992 requires an external reference in the range of 1.2 V to VDD. This allows the widest dynamic input range to the ADC. On-chip limit registers can be programmed with high and low limits for the conversion result, and an open-drain, out-ofrange indicator output ALERT becomes active when the conversion result violates the programmed high or low limits. This output can be used as an interrupt.
Chip1Stop:
Single ADC SAR 188ksps 12-bit Serial 10-Pin MSOP
Verical:
Dual Channel Single ADC SAR 188ksps 12-bit Serial 10-Pin MSOP Tube
DeviceMart:
IC ADC 12BIT 2CHAN I2C 10MSOP
Win Source:
IC ADC 12BIT 2CHAN I2C 10MSOP
电源电压DC 2.70V min
供电电流 1.40 mA
电路数 1
通道数 2
针脚数 10
位数 12
耗散功率 6.05 mW
数据速率 79.0 kbps
采样率 79 ksps
分辨率Bits 12.0
输入电容 30.0 pF
模数转换数ADC 1
输入数 2
工作温度Max 125 ℃
工作温度Min -40 ℃
耗散功率Max 6.05 mW
输入通道数 2
电源电压Max 5.5 V
电源电压Min 2.7 V
输入电压 2.5 V
安装方式 Surface Mount
引脚数 10
封装 MSOP-10
长度 3 mm
宽度 3 mm
高度 0.95 mm
封装 MSOP-10
工作温度 -40℃ ~ 125℃
产品生命周期 Active
包装方式 Tube
制造应用 Signal Processing, 自动化与过程控制, Automation & Process Control, 信号处理
RoHS标准 RoHS Compliant
含铅标准 Lead Free
REACH SVHC标准 No SVHC
军工级 No
REACH SVHC版本 2015/12/17
ECCN代码 EAR99
型号/品牌 | 代替类型 | 替代型号对比 |
---|---|---|
AD7992BRMZ-0 ADI 亚德诺 | 当前型号 | 当前型号 |
AD7992BRMZ-0REEL 亚德诺 | 完全替代 | AD7992BRMZ-0和AD7992BRMZ-0REEL的区别 |
AD7992BRM-0 亚德诺 | 完全替代 | AD7992BRMZ-0和AD7992BRM-0的区别 |
ADC122S021CIMM 德州仪器 | 功能相似 | AD7992BRMZ-0和ADC122S021CIMM的区别 |