ADL5567ACPZN-R7

SP Amp DIFF AMP Dual 5.25V 24Pin LFCSP EP T/R

Product Details

The ADL5567 is a high performance, dual differential amplifier optimized for intermediate frequencies IF and dc applications. The amplifier offers a low noise of 1.29 nV/√Hz and excellent distortion performance over a wide frequency range, making it an ideal driver for high speed 16-bit analog-to-digital converters ADCs. The ADL5567 is ideally suited for use in high performance zero-IF and complex IF receiver designs. In addition, this device has excellent low distortion for single-ended input driver applications.

The ADL5567 provides a gain of 20 dB. For the single-ended input configuration, the gain is reduced to 18 dB. Using two external series resistors for each amplifier expands the gain flexibility of the amplifier and allows for any gain selection from 0 dB to 20 dB for a differential input and 0 dB to 18 dB for a single-ended input. In addition, this device maintains low distortion down to output common-mode levels of 1.25 V, and therefore providing an added capability for driving CMOS ADCs at ac levels up to 2 V p-p.

The quiescent current of the ADL5567 using a 5 V supply is typically 74 mA per amplifier in high performance mode. When disabled, each amplifier consumes only 3.5 mA, and has 58 dB input to output isolation at 100 MHz.

The device is optimized for wideband, low distortion, and low noise operation, giving it unprecedented performance for overall spurious-free dynamic range SFDR. These attributes, together with its adjustable gain capability, make this device the amplifier of choice for driving a wide variety of ADCs, mixers, pin diode attenuators, SAW filters, and multielement discrete devices.

Fabricated on an Analog Devices, Inc., high speed silicon germanium SiGe process, the ADL5567 is supplied in a compact 4 mm × 4 mm, 24-lead LFCSP package and operates over the −40°C to +85°C temperature.

Applications

.

Differential ADC drivers

.

Single-ended to differential conversions

.

RF/IF gain blocks

.

SAW filter interfacing

### Features and Benefits

.

−3 dB bandwidth of 4.3 GHz

.

High performance HP, low power LP, and power down modes

.

Preset 20 dB gain can be reduced by adding external resistors

.

Channel to channel gain error: 0.04 dB at 500 MHz

.

Channel to channel phase error: 0.6° at 500 MHz

.

Differential or single-ended input to differential output

.

Internally dc-coupled inputs and outputs

.

Low noise input stage: 7.4 dB noise figure at 500 MHz

.

Low broadband distortion for supply = 5 V, HPmode, and 2 Vp-p

.

200 MHz: −94 dBc HD2, −103 dBc HD3

.

500 MHz: −82 dBc HD2, −82 dBc HD3

.

IMD3 of −104 dBc at 200 MHz and −90 dBc at 500 MHz

.

See data sheet for additional features