250 kSPS时， 10位/ 12位ADC，采用6引脚SC70 250 kSPS, 10-/12-Bit ADCs in 6-Lead SC70
Product Details
The /AD7920 are 10-bit and 12-bit, high speed, low power, successive-approximation ADCs respectively. The parts operate from a single 2.35 V to 5.25 V power supply and feature throughput rates up to 250 kSPS. The parts contain a low-noise, wide bandwidth track/hold amplifier, which can handle input frequencies in excess of 6 MHz.
The conversion process and data acquisition are controlled using CS and the serial clock, allowing the devices to interface with microprocessors or DSPs. The input signal is sampled on the falling edge of CS and the conversion is also initiated at this point. There are no pipelined delays associated with the part.
The AD7910/AD7920 use advanced design techniques to achieve very low power dissipation at high throughput rates.
The reference for the part is taken internally from VDD. This allows the widest dynamic input range to the ADC. Thus the analog input range for the part is 0 to VDD. The conversion rate is determined by the SCLK.
### Features and Benefits
- .
- Specified for VDD of 2.35 V to 5.25 V
- .
- Low Power:
3 mW typ at 250 KSPS with 3 V Supplies
12.5 mW typ at 250 KSPS with 5 V Supplies
- .
- Wide Input Bandwidth:
70 dB SNR at 100 kHz Input Frequency
- .
- Flexible Power/Serial Clock Speed Management
- .
- Throughput Rate: 250 kSPS
- .
- No Pipeline Delays
- .
- High Speed Serial Interface SPI®/QSPI™/MICROWIRE™/DSP Compatible
- .
- Standby Mode: 1 µA max
- .
- 6-Lead SC70 Package
- .
- 8-Lead µSOIC Package
