ADN8835ACPZ-R7

Sensor and Detector Interface 5.5V 3.3mA 36Pin LFCSP EP T/R

Product Details

The ADN8835 is a monolithic TEC controller with an integrated TEC controller. It has a linear power stage, a pulse-width modulation PWM power stage, and two zero-drift, rail-to-rail chopper amplifiers. The linear controller works with the PWM driver to control the internal power MOSFETs in an H bridge configuration. By measuring the thermal sensor feedback voltage and using the integrated operational amplifiers as a proportional integral differential PID compensator to condition the signal, the ADN8835 drives current through a TEC to settle the temperature of a laser diode or a passive component attached to the TEC module to the programmed target temperature.

The ADN8835 supports negative temperature coefficient NTC thermistors as well as positive temperature coefficient PTC resistive temperature detectors RTDs. The target temperature is set as an analog voltage input either from a digital-to-analog converter DAC or from an external resistor divider.

The temperature control loop of the ADN8835 is stabilized by PID compensation utilizing the built in, zero-drift chopper amplifiers. The internal 2.50 V reference voltage provides a 1% accurate output that biases a thermistor temperature sensing bridge as well as a voltage divider network to program the maximum TEC current and voltage limits for both the heating and cooling modes. With the zero-drift chopper amplifiers, excellent long-term temperature stability is maintained via an autonomous analog temperature control loop.

**Applications**

.

TEC temperature control

.

Optical modules

.

Optical fiber amplifiers

.

Optical networking systems

.

Instruments requiring TEC temperature control

### Features and Benefits

.

High efficiency single inductor architecture

.

Integrated low RDSON MOSFETs for the TEC controller

.

TEC voltage and current operation monitoring

.

No external sense resistor required

.

Independent TEC heating and cooling current-limit settings

.

Programmable maximum TEC voltage

.

2.0 MHz typical PWM driver switching frequency

.

External synchronization

.

Two integrated, zero-drift, rail-to-rail chopper amplifiers

.

Compatible with NTC or RTD thermal sensors

.

2.50 V reference output with 1% accuracy

.

Temperature lock indicator

.

Available in a 36-lead, 6 mm × 6 mm LFCSP